Figure 6 shows an example SC Express system setup.
2
1
Terminal Block
Confirm SC Express Module Recognition
To confirm module recognition, complete the following steps:
Software support for the NI PXIe-4339 is provided by NI-DAQmx. The DAQ
Note
Getting Started Guide, which you can download at
step-by-step NI-DAQmx instructions for installing software and hardware,
configuring channels and tasks, and getting started developing an application. For
detailed NI software version support, refer to the NI-DAQmx Readme.
1.
Launch MAX.
Expand Devices and Interfaces, and expand the chassis in which the module is located to
2.
confirm that MAX detects the module and terminal block. The terminal block should
appear beneath its associated module. If your module or terminal block is not listed, press
<F5> to refresh MAX. If the module is still not recognized, go to
.
daqmx
NI PXIe-4339/TB-4339 Installation Guide and Terminal Block Specifications | © National Instruments | 9
Figure 6. Sample SC Express System
1
2
Signal Input
ni.com/manuals
, offers
ni.com/support/