Lightspeed RedcatAccess Quick Start Manual page 2

Quick Start Guide
Redcat Access
Power Status
Push
Level
Media Connector
Power Status
Media Media Connector Connector
Push
Level Audio Audio Tone
Input Output
1
DETERMINE LOCATION
Media Connector is designed to be
connected to the primary media
source in the classroom, usually the
computer or display panel.
CONNECTING TO AN ANALOG AUDIO SOURCE
Plug your external audio equipment (computer, tablet, video display,
etc.) into one of the Audio input jacks using a 3.5mm audio cable.
Adjust the volume by pressing the Audio Input selector and adjusting
the level knob.
USING FLEXMIKE AS A WIRELESS AUDIO LINK
You can connect a 2nd microphone to your computer's USB port to
enable a wireless 2-way audio link.
SEND AUDIO FROM THE COMPUTER to the Redcat to ensure all
audio from the computer (videos, video conferencing, audiobooks,
music, etc) can be played through Redcat Access.
SEND AUDIO TO THE COMPUTER from the Redcat Access to ensure
the teacher's Flexmike and any student microphones are clearly
picked up by a video conferencing solution.
For complete operating instructions, go to
with optional Media Connector
Media Media Connector Connector
Audio Audio Tone
Input Output
2
CONNECT TO POWER
Connect the USB cable power cord
to a computer, or use the USB power
adapter to plug into wall outlet.
Plug the USB cable into the USB input
on the back of the Media Connector.
www.lightspeed-tek.com/RCAN-usermanual
OR
Power Status
Push Media Connector Media Connector
Audio Audio Tone
Level
Input Output
Audio Inputs
Power Status Media Media Connector
Push
Audio Audio Tone
Level
Input Output
LEVEL AUDIO INPUT SELECTOR
(or scan the 2D barcode).
POWER LIGHT
Power Status
Media Media Connector Connector
Push
Audio Audio Tone
Level
Input Output
3
POWER ON
When powered on, the white LED on the front
panel will glow.
Redcat does not need to be powered off at the
end of day, but if desired, you may power down
Redcat by powering down the Media Connector.
Audio Outputs
USB
V / . A
3.5MM CABLE
Connector
Connect the microphone to
your computer using a USB-C
cable. Open your computer
sound settings to select
Lightspeed Audio as the
microphone and speaker.
USB cable sold separately. Lightspeed offers
a USB-A to USB-C cable for sale (part #USBC)
QS0618US01-1