Downloading An Ipsec Key; Transferring Configuration Files; Delta Configuration File; Downloading A Logo - EMS 2000 IDU Series User Manual

Table of Contents

Advertisement

2.6.3 Downloading an IPSec Key

2.6.4 Transferring Configuration Files

2.6.5 Delta Configuration File

2.6.6 Downloading a logo

2.6.7 Uploading Alarms and Events

Series 2000/3000 IDU User's Manual
Revision P4
If at any time you wish to run the previous (alternate) software version, click Reboot from
Alternate.
You can download a new IPSec key to the IDU using the File Management page. Ensure
that the key.dat file is located on the FTP server path configured above. Then, click Down-
load key.dat. The key.dat file will be transferred from the FTP server to the IDU.
It is easy to download a new configuration file to the IDU. You can also upload, or export,
the IDU's configuration file to the FTP server for use on other IDUs. These tasks are done
using the File Management page.
To download a new configuration file to the IDU, first ensure that the new configuration
file is named "sitcfg.txt" and is located on the FTP server path configured above. Then,
click Download sitcfg.txt.
To upload the IDU's configuration file to the FTP server, click Upload sitcfg.txt. The
sitcfg.txt file will be transferred to the FTP server.
Not supported.
You can customize the look of the IDU web interface pages by replacing the default EMS
logo. This is done using the Web Page Management page.
The filename of the new logo must be "logo.gif", and it must be located on the FTP server
path configured above. The file must be in GIF format and be less than 10 kb in size. To
display correctly, the file should have dimensions of about 246 pixels wide by 43 pixels
high.
To download a new logo, click Download LOGO.GIF file. The new logo will appear
when the web page is refreshed.
The IDU stores a record of alarms, errors and other events (see
can be uploaded to the FTP server for analysis and archiving. This is done using the IDU
Log page (see
section
3.1.2).
To upload alarms and events, click Dump Log to FTP Server as SITLOG.BIN file. A
binary file will be uploaded to the FTP server with the name "sitlog.bin". This file is not
viewable except by EMS Satellite Networks.
Page 24
Appendix
A). This record

Advertisement

Table of Contents
loading

This manual is also suitable for:

3000 idu series

Table of Contents