EMS 2000 IDU Series User Manual page 16

Series 2000/3000 IDU User's Manual
Revision P4
to install the component in your equipment. Just before unwrapping the anti-static
packaging, be sure to discharge static electricity from your body.
• When transporting a sensitive component, first place it in an anti-static container or
packaging.
• Handle all sensitive components in a static-safe area. If possible, use anti-static
floor pads and workbench pads.
• This unit is provided with a protective ground incorporated in the power cord. The
mains plug shall only be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or outside the equipment,
is likely to make the equipment dangerous. Intentional interruption is prohibited. If
you are unable to insert the plug into the outlet, contact an electrician to replace the
outlet. Do not defeat the safety purpose of the ground-type plug.
• Unplug the unit power cord by gripping the power plug, not the cord.
• Do not place the unit on an unstable cart, stand, tripod, bracket, table, or on a bed,
sofa or rug. The unit may fall, causing personal injury and damage to the unit.
• Do not overload wall outlets or extension cords, as this can result in a risk of fire or
electrical shock.
• We recommend using an outlet that contains surge suppression or ground fault protec-
tion. For added protection during a lightning storm, or when the SIT is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the
lines between the indoor unit and the antenna. This will prevent damage caused by
lightning or power line surged.
• Unplug the unit from the wall outlet and refer servicing to authorized service person-
nel whenever the following occurs:
• The power supply cord or plug is damaged;
• Liquid has been spilled, or objects have fallen into the indoor unit;
• The unit has been exposed to rain or water;
• The unit has been dropped or the chassis has been damaged;
• The unit exhibits a distinct change in performance.
Page 12