Decal Location - Meridian 405 SLD SEED EXPRESS Operator's Manual

Operator's Manual: 405 SLD Seed Express
The following illustrations show the general location of decals on this tender. The position of decals may
vary depending on the machine's options. Decals are not shown at actual size.
Fig 2 - Left side of tender
19984
CAUTION
• Read and understand the Operator's Manual before using. Review
safety instructions annually.
• Stop engine, remove ignition key, and wait for all moving parts to stop
before servicing, repairing, adjusting, loading, filling, or unplugging.
• Keep working area clean and free of debris to prevent slipping or
tripping.
• Do not allow riders on the trailer or frame when transporting.
• Only enter seed compartment when it is empty.
• Keep hands, feet, hair, and clothing away from moving parts.
• Do not place hands, arms, or body between seed box and frame or lid
to prevent pinching or crushing. Components can move unexpectedly.
• Do not place hands, fi ngers, or arms between unloading auger tube
segments when placing in unloading configuration.
• Stay away from overhead power lines. Electrocution can occur
without direct contact.
• Install and secure all guards before starting.
• Use care when climbing on frame or ladder to prevent slipping or
falling.
• Do not smoke when refuelling or working around machine.
• Fasten frame securely to trailer before transporting.
• In two compartment seed tenders, always empty Compartment 2 fi rst
to prevent an unbalanced load. An unbalanced load can cause hitch
to upend.
19934
19934
2-4
Bulk Seed Tender
™

2.5 DECAL LOCATION

20087
Fig 3 - Right side of tender
®
Instructions - Release Conveyor (10379)
Instructions - Capture Conveyor (10378)
Keep hands and
conveyor tube
when placing it
Weight of tube
crushing injuries.
ROTATING PART HAZARD
KEEP AWAY
To prevent serious injury or death from rotating parts:
• Stop engine, remove ignition key, and wait for all moving
parts to stop before servicing, adjusting, repairing or
unplugging.
• Install and secure all guards before operating.
• Do not operate with rotating parts exposed.
19936
19936
®
ELECTROCUTION
CRUSH
HAZARD HAZARD
Avoid contact with overhead power
arms clear of
lines or electrically power ed objects.
• Be aware of your surroundings when
raising or lowering conveyor.
in storage
position.
• Maintain at least 20 feet between
equipment and any electrical hazard.
will cause
• Contact with electricity can result
in serious personal injury or death.
17509 17509
WARNING
THIS MACHINE IS AUTOMATICALLY,
AND REMOTELY CONTROLLED. THE
HOPPER GATES WILL OPEN AND
CLOSE DURING THE OPERATION OF
THIS MACHINE WITHOUT WARNING.
DO NOT PLACE HANDS AND OR
OTHER BODY PARTS THROUGH THE
GATE OPENINGS WHILE OPERATING
THIS MACHINE.
MAINTAIN A SAFE DISTANCE WHILE
OPERATING THIS MACHINE.
15056
15056
15061
FALLING HAZARD
Avoid serious injury or death from falling:
• Grip the ladder with both
hands when climbing to
prevent slipping or falling.
• Keep rungs clean to
prevent slipping.
19939
19939
WARNING
THIS MACHINE IS AUTOMATICALLY,
AND REMOTELY CONTROLLED. THE
HOPPER GATES WILL OPEN AND
CLOSE DURING THE OPERATION OF
THIS MACHINE WITHOUT WARNING.
DO NOT PLACE HANDS AND OR
OTHER BODY PARTS THROUGH THE
GATE OPENINGS WHILE OPERATING
THIS MACHINE.
MAINTAIN A SAFE DISTANCE WHILE
OPERATING THIS MACHINE.
15056
15056
Revised 08.2021