Safety Decals; Safety Decal Location - Meridian SMOOTHWALL BIN Owner's Manual

Owner's Manual: Smoothwall Bin

2.5 SAFETY DECALS

• Keep safety decals clean/legible at all times.
• Replace safety decals that are missing or have
become illegible.
• All safety decals have a part number in the
lower right hand corner. Use this part number
when ordering replacements.
• Safety decals are available from your authorized
distributor, dealer's parts department or from
the factory.
2.5.1 Applying Decals:
1. Be sure the application area is clean and
dry. Ensure the surrounding temperature is
above 10°C (50°F).
a. Remove all dirt, grease, wax from surface.
b. Clean with a non-ammonia based
cleaner.
c. Wipe the clean surface with isopropyl
alcohol on paper towel, and allow to dry.
2. Determine the exact position before you
remove the backing paper.
3. Peel a small portion of the split backing paper.
4. Align the decal over the specified area. Use
a squeegee to carefully press the small
portion, with the exposed adhesive backing,
into place.
5. Slowly peel back the remaining paper and
carefully smooth the rest of the decal into
place.
6. Small air pockets can be pierced with a pin
and smoothed out using the squeegee, or a
piece of sign backing paper.
Revised 06.2021

2.4 SAFETY DECAL LOCATION

Safety decals are attached to the structure in a
visible and convenient location for readability.
A safe workplace requires that you familiarize
yourself with the information on the decals.
Fig 2 - Safety decal
®
19977SK-70
2-3