Meridian 405 SLD SEED EXPRESS Operator's Manual page 43

Operator's Manual: 405 SLD Seed Express
9. Release and push the lock pin inward to lock
the inner and outer tubes of the conveyor
arm together.
- Make sure the pin is fully engaged.
10. Once the tubes are locked together, rotate
hopper guide handle 90°.
- See illustration for the correct position.
11. Use the toggle switch on the handle to
operate the actuator that opens and closes
the hitch receiver.
- Press and hold the toggle switch downward
to open.
- Refer to decal #10379 for instructions.
10. Release and push the lock pin inward to lock
the inner and outer tubes of the conveyor arm
together. Make sure the pin is fully engaged.
12. Slide the ball coupling out of the conveyor
hitch receiver.
MMG-00329
Revised 08.2021
11. Once the tubes are locked together, rotate
hopper guide handle 90° into the position
shown.
together. Make sure the pin is fully engaged.
10. Release and push the lock pin inward to lock
the inner and outer tubes of the conveyor arm
Bulk Seed Tender
™ ®
together. Make sure the pin is fully engaged.
MMG-00329
11. Once the tubes are locked together, rotate
hopper guide handle 90° into the position
MMG-00329
shown.
11. Once the tubes are locked together, rotate
hopper guide handle 90° into the position
shown.
12. Slide the ball coupling out of the conveyor
hitch receiver.
40
CRUSH
40
HAZARD
Keep hands and
arms clear of
conveyor tube
when placing it
Fig 42 - Push in locking pin
Fig 43 - Hopper guide handle
Fig 44 - Toggle switch
Fig 45 - Ball coupler
ELECTROCUTION
Avoid contact with overhead power
lines or electrically powered objects.
• Be aware of your surroundings when
12.
®
Be o
elec
13.
Be o
elec
13.
If tw
one
con
a cr
bod
If tw
one
con
a cr
bod
3-23
HAZARD