Handset Display Panel; Handset Display Messages - Meridian 405 SLD SEED EXPRESS Operator's Manual

Operator's Manual: 405 SLD Seed Express

3.4.2 Handset Display Panel:

(1) Weight Displayed in Pounds.
(2) Signal Strength.
(3) Percentage of Battery Life.

3.4.3 Handset Display Messages:

Pressing the POWER button turns the remote
control handset transmitter ON and displays the
message "Meridian Mega Remote".
If the "NO LINK" message appears, the remote
ENABLE/DISABLE DISPLAY
control handset is not communicating with the
Hold both INCREASE and DECREASE push
control panel on the seed tender. Make sure the
buttons on the control panel simultaneously for 10
ON/OFF key switch is in the ON position.
seconds to enable or disable the display.
BAR PAGE
On the BAR PAGE where all weights are shown
separately, holding down the TARE button on the
control panel for 10 seconds will zero the reading
for all the bars.
5.4.2 Display Panel
3-12
BAR PAGE buttons on the control panel simultaneously for 10
seconds to enable or disable the display.
On the BAR PAGE where all weights are shown
separately, holding down the TARE button on the
BAR PAGE
control panel for 10 seconds will zero the reading
On the BAR PAGE where all weights are shown
for all the bars.
Bulk Seed Tender
™ ®
separately, holding down the TARE button on the
5.4.2 Display Panel control panel for 10 seconds will zero the reading
for all the bars.
5.4.2 Display Panel
(1) Weight Displayed in Pounds. (2) Signal
Strength. (3) Percentage of Battery Life.
(1) Weight Displayed in Pounds. (2) Signal
Strength. (3) Percentage of Battery Life.
5.4.3 Display Messages
5.4.3 Display Messages
Pressing the POWER button turns the remote
transmitter ON and displays the message
"Meridian Mega Remote".
Pressing the POWER button turns the remote
transmitter ON and displays the message
"Meridian Mega Remote".
If the "NO LINK" message appears, the remote
transmitter is not communicating with the control
panel on the seed tender. Make sure the ON/OFF
key switch is in the ON position.
®
If the "NO LIN
transmitter is
panel on the
If the "NO LIN
key switch is
transmitter is
panel on the
key switch is
The remote tr
the seed in th
also displays
The remote tr
in a percenta
the seed in th
also displays
in a percenta
When the PO
the message
displayed.
When the PO
the message
displayed.
Revised 08.2021