Section 1 Wing Assembly - Elite Models Acrocub Instruction Manual

Section 1 Wing Assembly

1 x Left wing
1 x Right wing
1 x Central wing
2 x Leading edge flap (White EPP foam)
6 x Side force generators (SFG)
1 x Heat shrink tubing (150mm)
2 x Aileron control horn (White PVC plastic)
2 x Aileron arm
4 x Servo fixed plate (2mm)
4 x Screws of aileron arm (M2*6mm)
2 x Carbon fiber rod (1*6*1000mm)
8 x Z-bend
4 x Plastic ends for the
1 x Wing bolt (3mm)
Locate 2 carbon fiber rods (1*6*1000mm), left wing,
middle wing and right wing.
leading edge flap
First, apply foam glue to join the parts of the wing.
Wait for 4-5 minute. After that, join the left and right
wing with the central wing and allow the glue to
properly cure.
1