Advertisement
Glue the end with control horn to the left side of right
leading edge flap and to the right side of left leading
edge flap.
Locate 4 wood swivel piece for the
and 4 M2*6mm screws.
Secure the wood piece to each end.
leading edge flap
3
Apply foam glue to four pre-cut slots on the leading
edge of the wing. Wait for 4-5 minute. Slide two
leading edge flaps into the slot.
Secure the wing bolt to the pre-cut slot on the trailing
edge of the central wing using foam glue. Pay
attention to wing bolt should be fixed on the lower
surface of the wing.
Advertisement
