Advertisement
Assembly of fuselage front cover and canopy
Apply glue to the top of the fuselage head.
Apply glue to the support frame.
Glue the wood support frame on the top front of the
fuselage.
Apply glue on the fuselage where the front cover
meets the canopy. The triangle foam support piece
needs to be positioned so it can secure both the front
cover piece and the canopy piece.
Apply glue to the two sides of the triangle foam.
Glue the foam triangle to the fuselage
Locate your motor, ESC, and motor installation screws.
The motor and ESC must be purchased separately.
We recommend 2212/2830 or larger brushless
motors. Small motors would not have enough
clearance. Install your motor on the radial mount.
12
Advertisement
