Section 1: Airframe Assembly - Elite Models Yak55 Instruction Manual

Section 1: Airframe Assembly

Step1. As shown in the picture, place the fuselage
on a work surface, and glue the wings to the
fuselage.
Step2. Put some foam glue into the spar slot.
Step3. Press 650mm wing spar into the slot and use
weights to keep it in position until the glue cures.
Step4. Glue two pivots to the horizontal fuselage.
Step5. Insert the 400mm rod into the pivot.
Step6. Put some foam safe glue into the stab's slot.
Step7. Fit the 400mm rod into the stabilizer, weight
it down until the glue cures.