Elite Models Acrocub Instruction Manual page 12

Locate the motor mount.
Apply glue to the pre-cut slot of the right fuselage.
slide the motor mount into the slot.
Apply foam glue to the inter-locking joining areas of
the right fuselage.
Apply foam glue to the inter-locking joining areas of
the left fuselage upper part.
After that, slide the right fuselage into the slot of the
left fuselage upper part. Wait for at least 3-5 minute
until the glue has cured.
Apply the glue to the inter-locking joining areas of the
left fuselage lower part.
8