Editing The Storage Server - Canon VK-64 Administrator's Manual

Do not add the same Storage Server more than once.
If you add a Storage Server with a different configuration
Note
(such as one managed by another Master Storage Server),
your original Locations and Zones will be lost.
If you are using Windows XP SP2 or Windows Server 2003,
you need to change Windows settings. Refer to "Notes on
Operating Environment" (➝ P. 24).
Do not change the port number.

Editing the Storage Server

In the Storage and Camera Server Summary, select the Storage Servers tab.
1
A list of Storage Servers already added are displayed.
This function lets you change the network address used to
access a particular Storage Server in case the IP address has
Note
changed.
The Master Storage Server cannot be edited.
Adding the Storage Server
Double-click the Storage Server in
2
the list.
Alternatively, select the Storage
Server and click Edit.
This will bring up the Edit Storage
Server dialog.
Enter connection settings and click
3
OK.
To save changes, click
4
Save Changes at the
bottom right-hand corner
of the Camera Summary
window.
Click Discard Changes
to cancel any changes
you have made.
4
83