Canon VK-64 Administrator's Manual page 257

Messages
Organize It cannot be overwritten because it
Layouts & is used in the layout sequence.
Layout
Sequences
dialog
The folder cannot be created.
'Folder name' already exists.
The layout name cannot be
changed. 'Layout name' already
exists.
The folder name of the layout
cannot be changed. 'Folder name'
already exists.
A layout with the same name is
already registered. Are you sure
you want to overwrite?
A layout or folder with the same
name is already registered.
It cannot be deleted because it is
used in the layout sequence.
Sensor Event Specify the frame rate for the
Settings dialog sensor 'sensor name' recording
between 'fps' and 'fps'.
Sensor Settings The maximum value of the pre-
dialog event sensor 'sensor name'
recording is 30 seconds.
Viewer Settings Do you want to save the changes in
window the Viewer settings?
List of Messages
Cause
An attempt was made to change or
overwrite the layout that is being
used in the currently active layout
sequence.
An attempt was made to create a
new folder with a name that is
already being used.
An attempt was made to change the
name of a layout or layout sequence
to a name that is already being used.
An attempt was made to change the
name of a folder to a name that is
already being used.
A layout or layout sequence with the
same name exists in the folder to
which the layout or layout sequence
is moved or copied.
A folder with the same name as the
folder to which the layout or layout
sequence is moved or copied exists.
Or, a layout or layout sequence with
the same name exists in the folder to
which the folder is moved or copied.
An attempt was made to delete the
current layout sequence.
An invalid recording frame rate was
entered.
OK was pressed after configuring a
value exceeding 30 seconds for the
pre-event time value.
An attempt was made to close the
Viewing Screen without saving the
changes.
9
257