Specify The Ip Address Of Storage Server To Connect Viewer - Canon VK-64 Administrator's Manual

Starting the Viewer

Specify the IP address of Storage Server to connect Viewer

If you installed the Viewer and Storage Server on separate PCs, specify an IP address of
Storage Server and connect Viewer to the Storage Server.
Note
Tip
152
If you need to use a proxy server, you need to change the
Internet option settings in the following procedure:
1. Select Start > Control Panel > Internet Option.
2. Select the Connection tab.
3. Click LAN settings ....
Change the proxy server settings.
If using a proxy server between a Viewer and a Storage Server,
it should be one which does not perform response buffering.
Proxies which are configured to perform response buffering
may lead to delays in sending small amounts of data (such as
events) from the Storage Server to the Viewer. The Apache
proxy server does perform response buffering so is not
recommended.
You cannot transmit or receive audio when using a proxy
server.
The dialog for entering the IP address will also be shown even
when connection to the Storage Server failed.
Select Use IP address from
1
the drop-down menu.
Click Connect.
2
Enter the IP address or host
3
name of the Master Storage
Server in Host Name or IP,
and the port number in Port.
Click Connect.
4
Enter your User Name and
5
Password, and click Login.