Canon VK-64 Administrator's Manual page 128

Setting Sensor Event Recording
●
Step 4: Set the Night Mode (VB-C300, VB-C50i/VB-C50iR, VB-
C50FSi, and VB-C50Fi)
●
Step 5: Set Additional Options (VB-C300)
Note
●
Step 6: Set frame rate and pre and post event recording duration
Note
128
VB-C300 only allows these options to be used.
If Exposure is set, the Backlight compensation option is set to
Not Specified.
The frame rate specified is the frame rate that the Storage Server
will attempt to record, and may not be the actual frame rate used
for recording video. Factors such as the number of Viewers, the
number of Camera Servers used, network traffic and load on the
Camera Server and the Storage Server may reduce the actual
frame rate recorded.
Select the Night Mode from the drop-
down menu. You can select from
Disabled, Enabled, or Not specified.
To use the exposure, white balance, and/or
focus settings on the Camera Control
Panel, check the corresponding check box.
In the Record Video At field:
Max. Frame Rate - select a
1
maximum frame rate for recorded
video from the drop-down menu,
or enter a value from the
keyboard. Choose from 0.1 to 30
frames per second (5 is the
default).