Canon VK-64 Administrator's Manual page 135

If the following warning appears, change the settings according
to the tables below.
Note
Warning example
* The tour time shown depends on the settings.
Click Cancel to return to the setting screen.
Click OK to save the current settings.
(If you are using the Preset Setting Tool, click Save on the setting
page of the tool)
Endurance of the pan/tilt mechanism is approximately 100,000
round trips at the full range. The total tour time depends on the
combination of the movement rate, movement range, and still
time. Refer to the following tables.
Total tour time for 100,000 round trips in the pan direction
(estimated).
Movement rate (PT) is 1.
Movement range in the
Still time
pan direction (angle)
(sec.)
50
0 3872
10 5666
20 7555
30 9444
Example: If the movement rate (PT) is 1, still time is 30 seconds,
and movement range (angle) in the pan direction is 50
degrees, it takes approximately 9,444 hours for 100,000
round trips in the pan direction.
Movement rate (PT) is 2.
Still time
(sec.)
100 150
3825 3809
4722 4407
10
5666 5037
20
6611 5666
30
(Unit: Time)
Setting the Preset Tour
Movement range in the
pan direction (angle)
50 100
0 1983 1936 1920
3777 2833 2518
5666 3777 3148
7555 4722 3777
(Unit: Time)
4
150
135