Canon VK-64 Administrator's Manual page 253

Messages
Viewing Screen The configuration window can only
be used by administrators.
Do you want to save the change in
this layout?
The image could not be saved.
Nothing could be saved because no
video was recorded at the specified
time.
Manual recording of the camera
'camera name' registered in the
Storage Server 'Storage Server
name' could not be started.
*The following message is added
when the number of camera
servers exceeds the licensing
restrictions.
The number of camera servers
exceeds the number allowed in the
licensing agreement.
The layout sequence settings will be
overwritten. Are you sure you want
to continue?
A layout with the same name is
already registered. Are you sure
you want to overwrite?
Saving/Managing 'Layout name' cannot be deleted
Video Layouts because it is currently in use.
The name is not specified. Check
the settings and try again.
Menu Buttons The image could not be saved.
List of Messages
Cause
An attempt was made by a user other
than an administrator to switch to the
Configuration window.
An attempt was made to close a
layout that has been changed.
A still image was captured using
snapshot but it could not be saved.
There are no recorded videos for the
selected segment thus they could not
be saved.
Manual recording could not be
started.
An attempt was made to save the
layout sequence with a name that is
already being used for a layout or
layout sequence in the destination
folder.
An attempt was made to save the
layout sequence in the folder using a
name that is already been registered
as a layout or layout sequence.
An attempt was made to delete a
layout that is currently being used.
An attempt was made to add a layout
folder without entering the name.
An error occurred when you
attempted to capture a snapshot in
the Video Window.
9
253