Canon VK-64 Administrator's Manual page 106

Configuring a Normal Schedule
●
Set the recording period
Tip
●
Select a day of the week to record video
Note
106
An example time period could be for overnight recording such
as 'Start 22:00 to End 08:00'.
Click All Day if you want 24 hour recording. The Start and End
times will be set at 00:00 respectively.
If you have defined any special day schedules, such as public
holidays, such schedules will override normal schedule times
for the whole day.
Times are given in 24 hours, for example 18:00 is 6:00 pm.
If a Camera Server has been configured with Restrict Service
Time, VK-64/VK-16 will not be able to record from the Camera
Server during restricted times.
The time zone used for the recording schedule will be the time
of PC where the Storage Server is running.
The Storage Server will adjust for Daylight Savings if
configured in the operating system.
Click the hours or minutes fields to
select, then click the up/down
arrows or directly enter a value to
change time.
In the Repeat on area, check the
days you wish to repeat the
recording period you set in the
Times area above.