Replacing The Filter; Removing The Filter; Technical Data; Disposal - DeLonghi ECAM44.62 Series Manual

41A
When you install the filter, you must notify the appliance of its
presence.
8. Press the MENU/ESC (B12) button to enter the menu;
9. Press < (B11) or > (B9) (fig. 9) until "Install filter" is
displayed;
10. Press the button (B8- fig. 6);
11. "Enable?" is displayed;
12. Press the button to confirm the selection. "HOT
WATER Press OK" is displayed;
13. Place a container (min. capacity: 500 ml) underneath the
cappuccino maker (A10);
14. Press the button to confirm the selection. The ap-
pliance begins hot water delivery and the message "Please
wait" is displayed;
15. After the flow of hot water stops, the appliance automatically
resets to "Ready for coffee" status.
The filter is now active and you can use the coffee machine.

15.2 Replacing the filter

When "REPLACE FILTER" is displayed, after two months (see date
indicator) or when the appliance has not been used for 3 weeks,
you should replace the filter (C4):
1. Extract the tank and exhausted filter;
2. Take the new filter out of its packet and proceed as illus-
trated in points 2, 3, 4, 5, 6 and 7 in the previous section.
3. Place a container (min. capacity: 500 ml) underneath the
cappuccino maker (A10);
4. Press the MENU/ESC (B12) button to enter the menu;
5. Press < (B11) or > (B9) (fig. 9) until "Replace filter" is
displayed;
6. Press the button (B8- fig. 6);
7. The message "Confirm?" is now displayed;
8. Press the button to confirm the selection;
9. "HOT WATER Press OK" is displayed;
10. Press the button to confirm the selection. The ap-
pliance begins hot water delivery and the message "Please
wait" is displayed;
11. After the flow of hot water stops, the appliance automatically
resets to "Ready for coffee" status.
The new filter is now active and you can use the coffee machine.

15.3 Removing the filter

If you want to use the appliance without the filter (C4), you
must remove it and notify the appliance of its removal. Proceed
as follows:
1. Extract the tank (A18) and exhausted filter;
2. Press the MENU/ESC (B12) button to enter the menu;
3. Press < (B11) or > (B9) (fig. 9) until "Install filter Enabled"
is displayed;
41B
4. Press the
5. "Disable?" is displayed;
6. Press the
button to exit the menu.

16. TECHNICAL DATA

Voltage:
Power:
Pressure:
Water tank capacity:
Size LxDxH:
Cord length:
Weight:
Beans container capacity:
The appliance complies with the following EC
directives:
• European Standby Regulation 1275/2008
• Materials and accessories coming into contact with food
conform to EEC regulation 1935/2004.

17. DISPOSAL

The appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
37
button (B8- fig. 6);
button to confirm and the MENU/ESC
220-240 V~ 50/60 Hz max. 10 A
1450 W
1,5 MPa (15 bar)
260x455x365 mm
1130 mm
10,5 Kg
2 L
400 g