Setting Water Hardness; Setting The Language; Beep; Default Values (Reset) - DeLonghi ECAM44.62 Series Manual

8.10 Setting water hardness

For instructions on setting water hardness, see "14. SETTING
WATER HARDNESS".

8.11 Setting the language

To modify the language of the display, proceed as follows:
1. Press the MENU/ESC (B12) button to enter the menu;
2. Press < (B11) or > (B9) (fig. 9) until "Set language" is
displayed;
3. Press the button (B8- fig. 6);
4. Press < or > until the required language is displayed;
5. Press the button to confirm;
6. A message confirming the language installed is displayed;
7. Press the MENU/ESC button to exit the menu.

8.12 Beep

This enables or disables the buzzer emitted by the machine each
time an icon or button is pressed or an accessory is inserted/
removed. To disable or re-enable the beep, proceed as follows:
1. Press the MENU/ESC (B12) button to enter the menu;
2. Press < (B11) or > (B9) (fig. 9) until "Beep" is displayed;
3. Press the button (B8- fig. 6): the message "Disa-
ble?" is displayed; (or "Enable?", if disabled);
4. Press the button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.

8.13 Default values (reset)

This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the MENU/ESC (B12) button to enter the menu;
2. Press < (B11) or > (B9) (fig. 9) until "Default values" is
displayed;
3. Press the button (B8- fig. 6);
4. The message "Confirm?" is now displayed;
5. Press the button to confirm and exit.

8.14 Statistics function

This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the MENU/ESC (B12) button to enter the menu;
2. Press < (B11) or > (B9) (fig. 9) until "Statistics" is displayed;
3. Press the button (B8- fig. 6);
4. By pressing < or > you can check:
- how many coffees have been made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener filter has been
replaced;
5. Press the MENU/ESC button twice to exit the menu.

9. MAKING COFFEE

9.1 Selecting the coffee taste

The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
repeatedly until the required taste is displayed.

9.2 Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, press the
button (B2- fig. 11) until the message corresponding to the re-
quired quantity of coffee is displayed:
Coffee selected
MY COFFEE
SHORT
STANDARD
LONG
EXTRA LONG

9.3 Customising the "my coffee" quantity

The appliance is set by default to automatically deliver 30 ml of
"MY COFFEE". To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts (A7- fig. 12);
2. Press the
is displayed;
3. Keep the button (B4- fig. 16) pressed until the mes-
sage "1 MY COFFEE Program quantity" is displayed and
coffee delivery begins. Release the button;
4. As soon as the coffee in the cup reaches the required level,
press the icon again.
The quantity of coffee in the cup has now been programmed.

9.4 Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
30
button (B3- fig. 10)
Quantity in cup (ml)
Programmable:
from ≃20 to ≃180
≃40
≃60
≃90
≃120
button (B2- fig.11) until "MY COFFEE"