Turning The Appliance On; Turning The Appliance Off; Menu Settings; Rinsing - DeLonghi ECAM44.62 Series Manual

Table of Contents

Advertisement

1. Connect the appliance to the mains electricity supply (fig.
1) and make sure the main switch (A21) at the back of the
appliance is pressed down (fig. 2).
2.
Remove the water tank (A18- fig. 3), open the lid (A20- fig.
4), fill to the MAX line with fresh water (fig. 5), replace the
lid and put the tank back in the appliance.
You must first choose the language by moving backwards and
forwards with the < (B11) or > (B9) (fig. 9) button, or waiting
until the languages scroll through on the display (B10) at inter-
vals of about 3 seconds:
3. When "English" appears, press the
6) for a few seconds until "English set" is displayed.
Follow the instructions indicated on the appliance display:
4. "HOT WATER, Press OK": place a container with a minimum
capacity of 100 ml under the cappuccino maker (A10) (fig. 7).
5. Press the
button to confirm. The appliance de-
livers water from the cappuccino maker then goes off
automatically.
The coffee machine is now ready for normal use.
Please note!
When setting up the appliance, you need to make 4-5 cups
of coffee or 4-5 cappuccinos before the appliance starts to
give satisfactory results.
To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a water
softener filter (C4) as described in the section "15. WATER
SOFTENER FILTER". If your model is not provided with a fil-
ter, you can request one from De'Longhi Customer Services.

6. TURNING THE APPLIANCE ON

Please note!
Before turning the appliance on, make sure the main switch
(A21) is pressed (fig. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
(A7) and is collected in the drip tray (A14) underneath. Avoid
contact with splashes of water.
To turn the appliance on, press the
8). The message "Heating up, Please wait" is displayed.
When heating is complete, the message changes to "RINSING".
As well as heating the boiler, this also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coffee appears.

7. TURNING THE APPLIANCE OFF

Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
During rinsing, a little hot water flows from the coffee spouts
(A7). Avoid contact with splashes of water.
To turn the appliance off, press the
8).
The message "Turning off Please wait" is displayed, then
the appliance performs a rinse cycle and goes off (standby).
button (B8- fig.
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
first turn the appliance off by pressing the
release the main switch (A21) at the back of the appliance
(fig. 2).
Never press the main switch while the appliance is on.

8. MENU SETTINGS

8.1 Rinsing

Use this function to deliver hot water from the coffee spout (A7)
to clean and heat the appliance's internal circuit.
Place a container with a minimum capacity of 100 ml under the
coffee spout.
To enable the function, proceed as follows:
1. Press the MENU/ESC (B12) button to enter the menu;
2. Press < (B11) or > (B9) (fig. 9) until "Rinsing" is displayed;
3. Press the
firm?" is displayed;
Do not leave the appliance unattended while hot water is being
delivered.
4. Press the
displayed;
5. After a few seconds, hot water is delivered from the cof-
fee spout to clean and heat the appliance's internal circuit.
"RINSING" is displayed, together with a progress bar which
fills gradually as preparation proceeds;
6. To stop the process press any button or wait for delivery of
button (B1- fig.
water to stop automatically.
Please note!
If the appliance is not used for more than 3-4 days, we
strongly recommend, when switching on the appliance,
performing 2/3 rinses before using it;
After cleaning, it is normal for the grounds container (A10)
to contain water.
28
Danger of burns!
Important!
button (B8- fig. 6): the message "Con-
Important! Danger of burns.
button. "RINSING Please wait" is
button (B1- fig.
button;

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecam44.620.s

Table of Contents