Setting Water Hardness - DeLonghi Dinamica Plus Perfetto User Manual

34
4. "DESCALER (LEVEL A)" "AND WATER (LEVEL B)" (fig. 35);
Pour the descaler into the tank up to the level A marked
inside the tank (equal to one 100ml pack), then add water
(one litre) up to level B and put the water tank back. Press
;
5. "EMPTY DRIP TRAY" (fig. 22):
6. Remove, empty and replace the drip tray (A15) and
grounds container (A11). Press
7. "POSITION 2l CONTAINER" "OK TO START":
Place an empty container with a minimum capacity of 2 litres
under the hot water spout (D6) and coffee spouts (A9) (fig. 9);
Important! Danger of scalding
Hot water containing acid flows from the hot water and coffee
spouts. Take care to avoid contact with splashes of this solution.
8. Press " " to confirm that you have added
the descaling solution. "DESCALING UNDERWAY" "PLEASE
WAIT" is displayed: The descale programme starts and
the descaler liquid comes out of the hot water and coffee
spouts. A series of rinses is performed automatically to re-
move all the scale residues inside the coffee machine;
After about 25 minutes, descaling stops;
9. "RINSE AND FILL WATER TANK UP TO MAX LEVEL" (fig. 4):
the appliance is now ready to rinse with fresh water. Empty
the container used to collect the descaler solution. Extract
the water tank, empty, rinse under running water, fill
with fresh water up to the MAX level and put back in the
appliance;
10. "POSITION 2l CONTAINER" "OK TO START RINSING": Place
the container used to collect the descaler solution empty
under the coffee spouts and hot water spout (fig. 9) and
press ;
11. Hot water is delivered first from the coffee spouts, then
from the hot water spout and "RINSING UNDERWAY" is
displayed;
+
A B
B
A
35
;
14. "RINSE AND FILL WATER TANK UP TO MAX LEVEL" (fig. 4): Fill
the tank up to the MAX level with fresh water;
15. "INSERT WATER TANK" (fig. 5): Put the water tank back in
the appliance;
16. "POSITION 2l CONTAINER" "OK TO START RINSING": Place
the container used to collect the descaler solution empty
under the hot water spout (fig. 9) and press
17. Hot water is delivered from the hot water/steam spout and
"RINSING UNDERWAY" "PLEASE WAIT" is displayed;
18. "EMPTY DRIP TRAY" (fig. 22): At the end of the second
rinse, remove, empty and replace the drip tray (A15) and
grounds container (A11) and press
19. "DESCALE COMPLETE": press
20. "FILL TANK WITH FRESH WATER": empty the container
used to collect the rinse water, remove the water tank and
fill with fresh water up to the MAX level, then put back in
the appliance.
The descaling cycle is now complete.
Please note!
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
• After descaling, it is normal for the grounds container
(A11) to contain water.
• If the water tank has not been filled to the MAX level, at
the end of descaling, the appliance requests a third rinse to
guarantee that the descaler solution has been complete-
ly eliminated from the machine's internal circuits. Before
starting rinsing, remember to empty the drip tray;
• The appliance may request descaling cycles at very short
intervals. This is normal and due to the appliance's ad-
vanced control system.
14.

SETTING WATER HARDNESS

The "DESCALING NEEDED PRESS OK TO START (~45MIN)
" message is displayed after a period of time established
according to water hardness.
16
12. When the water in the
tank has run out, empty
the container used to
collect the rinsing water;
13. (If the filter is installed)
"INSERT FILTER INTO
ITS HOUSING" (fig. 36).
Press "
extract the water tank.
Replace the water sof-
tener filter if removed
36
previously;
;
" and
;