Gold's Gym PRO Series User Manual page 9

7. Attach the Medium Pin (45) to the Seat Frame
(11) with an M4 x 12mm Screw (59).
Attach the Seat (14) and the Seat Frame Pivot
(23) to the Seat Frame (11) with two M6 x 35mm
Screws (56) and two M6 Washers (68).
Attach the Seat (14) to the Seat Frame (11) with
two M6 x 16mm Screws (61).
8. Orient the Backrest Frames (12) so that the indi-
cated holes are closer to the top of the Frames.
Apply a small amount of the included grease to
an M10 x 182mm Button Bolt (63). Attach the
Backrest Support (13) between the Backrest
Frames (12) with the Button Bolt and an M10
Nylon Locknut (66). Do not overtighten the
Nylon Locknut; the Backrest Support must
pivot easily.
Attach the Backrest (29) to the Backrest Frames
(12) with four M6 x 47mm Screws (67) and four
M6 Washers (68). Do not tighten the Screws
yet.
7
14
59
45
61
8
29
66
12
68
67
9
23
11
68
56
Holes
12
68
63
67
Grease
68
13