Table of Contents
Advertisement
INSTALLATION (continued):
9. Attach "WARNING" card (R) to hydraulic fitting
at tractor reel lift coupler with plastic tie.
WARNING: If a draper header is
attached to this tractor with wiring
modification made as in step 8,
remove one of the relays from kit
harness relay block. This will prevent unexpected
lowering of the reel when header drive is
engaged. Save relay for re-use when auger
header is reattached.
OPERATION:
See page 35 for operating instructions for the hydraulic roll opener option
ADJUSTMENTS AND CHECKS
Perform the final checks and adjustments as listed on the "Pre-Delivery Checklist" (yellow insert) to ensure the
machine is field-ready. Use the Operator's Manual for directions.
IMPORTANT: To avoid machine damage, before running header, check that no shipping dunnage has fallen
down between the auger and feed pans.
Form # 46620
UNLOADING & ASSEMBLY
79
R
ATTACH WARNING CARD TO TRACTOR
Issue 01/06
Advertisement
Table of Contents
