Specifications; Auger Header And Hay Conditioner - MacDon 912 Operator's Manual

AUGER HEADERS:
AVAILABLE SIZES
CUT WIDTHS
SINGLE SICKLE DRIVE
DOUBLE SICKLE DRIVE
SINGLE SICKLE SPEED
DOUBLE SICKLE SPEED
STANDARD SICKLE TYPE
GRASS SEED SICKLE TYPE
CUTTERBAR RANGE
GUARD ANGLE
Tractor models:
XX40/XX50
XX52/XX52i c/w shallow angle kit
XX52/XX52i w/o shallow angle kit
DELIVERY OPENING WIDTH
AUGER DRIVE
AUGER SPEED
AUGER TYPE
REEL DRIVE
REEL SPEED
REEL TYPE
HEADER WEIGHT
722 HAY CONDITIONER:
TYPE
ROLL WIDTH
ROLL DIAMETER
SPEED
WEIGHT
Form # 46620

SPECIFICATIONS

912 Single Sickle Header: 12 ft., 14 ft.
922 Double Sickle Header: 14 ft., 16 ft., 18 ft.
933 Grass Seed Header (Double Sickle): 12 ft., 14 ft.
12' 3" (3.73 m) / 14' 3" (4.34 m) / 16' 3" (4.95 m) / 18' 3" (5.56 m)
"C" belt to enclosed oil bath wobble box
Timing belts to enclosed oil bath wobble boxes
1450 S.P.M.
1875* or 1450 S.P.M. (* - factory assembled)
Over-serrated (bolted) sections, double heat-treated guards
Fixed lower stub guards, over-serrated (bolted) sections and forged
adjustable upper hold-downs
6 in. (150 mm) below ground to 35.5 in. (900 mm) above ground
(measured to guard tip)
measured with cutterbar on ground:
8° to 16° below horizontal
8° to 16° below horizontal
11° to 18° below horizontal
912/922 Header: 60 in. (1524 mm)
933 Grass Seed Header: 68, 59, or 50 in. (1720, 1490, 1260 mm)
912 Header: "C" belt to chain final drive
922/933 Header: Enclosed gearbox
912 Header: 210 rpm standard, 186 rpm optional
922 Header: 205 rpm standard, 170 rpm optional
933 Grass Seed Header: 12' & 14' = 170 rpm, 16' = 205 rpm
24 in. (610 mm) diameter - center feed
912 Header: "C" belt from auger drive
922/933 Header: Hydraulic to chain final drive
912 Header: 71 rpm Standard, 63 or 80 rpm Optional
922 Header: 30 to 75 rpm (variable from cab)
933 Grass Seed Header: 30 to 69 rpm (variable from cab)
912/922 Header: 5 Bat (standard)
933 Grass Seed Header: 6 bat standard
Pick-up Reel, cam action, replaceable steel fingers
12' 912 single sickle - 2435 lbs. (1105 kg)
14' 912 single sickle - 2644 lbs. (1199 kg)
14' 922 double sickle - 2821 lbs. (1280 kg)
16' 922 double sickle - 3114 lbs. (1410 kg)
18' 922 double sickle - 3413 lbs. (1550 kg)
12' 933 Grass Seed double sickle - 2680 lbs. (1220 kg)
14' 933 Grass Seed double sickle - 2900 lbs. (1315 kg)
16' 933 Grass Seed double sickle – 3193 lbs (1451 kg)
Crimper - Intermeshing steel rolls, Header mounted
63.5 in. (1615 mm)
8.7" (220 mm)
850 rpm
730 lbs. (330 kg)
9
Issue 11/06