Table of Contents
Advertisement
Check power
sources
Always use
the provided
power adapter
Be careful of
overloading
Avoid damage
to power
cords
Avoid placing
the product
near any heat
source
Do not use the
product near
water
Avoid
stacking
Use caution
when moving
the product
ARRIS SD300/301 Access Appliance User Guide
Important Rules for Safe Operation
Plug this device only into the recommended
power source indicated on the product's marking
label. If you are not sure what type of power
source is provided at your location, consult your
local power company or other certified expert.
The U.S. is 110Vac
Japan is 100Vac
Europe is 230Vac
Australia is 264Vac
Always use the power adapter provided with the
product. Do not use any substitutes. If the
provided adapter becomes damaged or
misplaced, see the Replacement Parts chapter.
Do not overload wall outlets or extension cords,
as this can result in the risk of fire or electric
shock. Don't use any frayed power cords. Don't
stretch cords to reach the appliance or other
devices; tension at the connectors is a fire hazard.
Arrange power supply cords so they are out of the
way. Route them through areas where it is
unlikely they will be walked on or objects rolled
over them.
Never place this product near any heat source.
This includes any kitchen appliances (ovens,
toasters, etc.), heating vents, or any other heat
source. This is a fire hazard.
Never use this product anywhere near a water
source or in a damp area. Don't use it near
bathroom or kitchen water sources such as sinks
or washing appliances. Don't use it near pools.
Don't use it in a damp area such as a basement.
Avoid stacking this item on top of or under other
devices that can generate or radiate heat. Such
stacking can concentrate heat sources in a small
area and creates a fire hazard.
Use caution whenever moving the Access
Appliance. If dropped, resulting damage could
render the appliance inoperable or a fire hazard.
Chapter 1: Overview
Page 5
Advertisement
Table of Contents
