Arris SD300 User Manual page 21

Chapter 2: Installing the Access Appliance
Note: Make sure are all connections are secure; if necessary, use a wrench or
pliers to lightly tighten the connections.
5. Connect the PC Cable.
a) Locate the Ethernet PC cable included with the Access Appliance and
connect it to the Access Appliance's Ethernet port.
b) Connect the other end of that cable to an active Ethernet port on your PC. If
your PC does not have an Ethernet port, one must be installed before you
can use the Access Appliance. Many computer retail stores and service
centers can perform this task, if you require assistance.
Caution: Do not attempt to insert the supplied Ethernet cable into a dial-up modem. Doing
so could damage your modem port and/or the Ethernet cable.
6. Connect the Power Adapter to the Appliance.
Locate the included power adapter and connect the appropriate end to the PWR
port on the Access Appliance.
Page 14
ARRIS SD300/301 Access Appliance User Guide