Table of Contents
Advertisement
Wake Up On LAN/Ring An input signal on the serial Ring Indicator (RI) line
RTC Alarm Resume When Enabled, you can set the data and time at the
Date (of Month) Set a certain date when RTC Alarm Resume option
Resume Time (hh:mm:
Primary INTR Leave this field at default
IRQS Activity Monitor-
(in other words, an incoming call on the modem) awak-
ens the system from a soft off state.
The choice: Enabled, Disabled.
which the RTC (Real Time Clock) alarm awakens the
system from suspend mode.
The choice: Disabled (default), Enabled.
is Enabled to awaken the system. This option is con-
current with Resume Time option.
Set a certain time when RTC Alarm Resume option is
ss)
Enabled to awaken the system. This option is con-
current with Date option.
The following is a list of IRQ's (Interrupt
ing
ReQuests), which can be exempted much as the
COM ports and LPT ports above can. When an I/
O device wants to gain the attention of the oper-
ating system, it signals this by causing an IRQ to
occur. When the operating system is ready to re-
spond to the request, it interrupts itself and per-
forms the service. When set On, activity will nei-
ther prevent the system from going into a power
management mode nor awaken it.
75KAV/75KAV-X
71
Advertisement
Table of Contents
