Table of Contents
Advertisement
A
bout Hard Disk DMA Function
Last but not least, user must enable the Hard Disk DMA function. The process
is below:
1. [Start] --> [Setting] --> [Control Panel] --> [System] --> [Device
Manager].
2. In Device Manager, select [Disk Drivers] --> [GENERIC IDE TYPEXX].
3. Select [Properties] for GENERIC IDE TYPEXX.
4. In Properties, select [Settings].
5. In Option item, select the DMA checkbox.
6. Restart your computer.
Step 13:
• After all the setup process is finished,
please restart your computer by clicking
on Finish.
75KAV/75KAV-X
41
Advertisement
Table of Contents
