LG CLOi UV-C Bot User Manual page 6

6 Before Use
y Install the charger in a safe place to prevent persons, children and animals from bum
ping into it and get injured.
- Failure to do so may cause an accident.
1
y If you are not using the robot for a long time, turn off its power and disconnect the powe
r plug from the outlet to protect the product and its battery.
- Electric shock or leakage may cause fire or other accidents.
- 로봇과 충전기 보관 시 물이나 먼지가 많은 환경을 피해 주시고 커버를 씌운 후
보관해 주세요.
y Do not let water or dust get into the robot or the charger.
- There is a risk of fire or product damage.
y Do not charge the robot where there is water.
y Do not pour liquids onto the product or expose it to foreign substances.
- Doing so may cause mis-detection or malfunction.
y Keep the robot and the charger from getting wet with water, lubricants or other simil
ar substances.
- There is a risk of electric shock, fire, failure or injury.
y Do not stop the robot or leave it on standby on a slope.
- The robot may tumble down or fall, resulting in failure or injury.
y Store the robot on a flat place with no slope.
y When opening or closing the UV-C lamp protection net, do not forcefully pull or incomplet
ely close the net. Doing so may cause the protection net to fall off while the robot is movi
ng. Make sure to remove and fit the parts correctly according to the
.)
- Dislodged protection net may cause damage or accident.
- If the robot continues to operate with the protection net incompletely closed, the UV-
C lamp may break and cause injury.
- 로봇 이동시에는 램프 비산 방지를 위하여 커버를 씌운 후 이동해 주세요.
OPERATION
y Mirrors, transparent objects and completely black objects which is placed 20cm from the gro
und may hinder the robot's ability to recognize obstacles. Remove or move such objects fro
m within the robot's travel range.
y Transparent obstacles (glass, transparent acrylic, etc.) have limitations in sensing dete
ction, so make sure there are no transparent obstacles in the robot's driving space..
- Transparent obstacles in the robot's travel range may cause safety accidents or injur
ies.
manual. (See page 73