LG CLOi UV-C Bot User Manual page 5

y Do not allow persons to approach the robot during its setup or installation.
- Doing so may cause injury or other accidents.
y Do not plug multiple power cables into one outlet.
- Overheating may cause a fire.
y Keep packaging materials (vinyl, styrofoam, etc.) out of the reach of children. These mat
erials can pose a suffocation risk to children.
y Do not insert conductors, such as chopsticks, into the grooves on the other side while the p
ower cable is connected to an outlet. Do not touch the power plug immediately after unpl
ugging it from the outlet.
- There is a risk of electric shock.
y Do not damage or bend the power plug or the power cable.
- Damage to the power cable may cause electric shock or fire.
y Handle the power plug with dry hands.
- There is a risk of electric shock.
y Use only with the designated power and voltage.
- There is a risk of electric shock or fire.
y Unplug the charger before moving it.
- There is a risk of electric shock or fire.
y Connect the power plug to a grounded outlet.
y Do not insert or drop metal objects (coins, hairpins, ironware, etc.) or flammable objects (ma
tches, paper, etc.) into the charger or the product's vent hole.
- There is a risk of electric shock or fire.
y Do not insert or drop metal objects (coins, hairpins, ironware, rods, etc.), rods, fingers or fla
mmable objects (matches, paper, etc.) into the holes on the lamp protection net.
- There is a risk of electric shock or fire.
- Lamp breakage may cause injuries.
y 램프에 수은이 포함되어 있으므로 램프가 깨졌을 경우 즉시 자리를 이탈하고 한 시
간 이상 충분히 환기 후 깨진 유리를 치우세요.
y Do not install, store or operate the product or the charger in highly humid places (85% relati
ve humidity or higher).
- Doing so may cause fire or malfunction.
y Do not place the product or the charger near fire equipment, explosives or flammable subs
tances.
- Doing so may cause a fire.
y Do not use products that use high- voltage electricity near the robot.
- Electric shock may cause a failure.
Before Use 5
1