Door Sensor : Power On; Door Sensor : Charging - LG CLOi UV-C Bot User Manual

22 Before Use

Door sensor : Power on

When using the door sensor for the first time, turn the power on.
1

Door sensor : Charging

You can charge the battery manually when using the sensor for the first time or when char
ging is necessary while you are operating the sensor.
Red light being on means the battery is low and needs to be charged.
- Turn on : Long press the button for
3.6 sec, till the blue light flashes for a s
econds (3 times), the device turns on.
1 Take out the magnetic suction charging
wire and plug in the adapter.
2 Place the magnetic suction wire close to
the bottom charging port, which will be
automatically and mutually fixed, then g
reen light is on for charging.
3 Until the green light is off, it is fully
charged.
4 The battery charging current is about 65
mA, so if you want to charge multiple se
nsors at once, consider the charger's curr
ent.