LG CLOi UV-C Bot User Manual page 48

48 Operation
4
4 Enter the OTP number on the mobile device
where the control app is installed. Once the
robot is registered on the mobile device, a
screen will appear for you to set the UV
processing target space.
,
Note
y Press [Skip] to proceed to UV processing
without registering the robot on the
mobile device.
5 Enter a name for the target space and
press [OK].
,
Note
y For the target space name, you can enter
the room number, place name, etc.
y Press [ ] (Previous) to move back to the
previous screen.
6 A warning about UV-C will appear. Check for
presence of persons and obstacles on the
floor within the UV processing target space
and press [OK].
>
Warning
y Since UV-C is harmful to the human body,
you must check for presence of any
persons or obstacles on the floor in
the UV processing target space. If there is
any person or animal within the UV
processing target space, move them out
of the space before starting UV
processing.
,
Note
y Press [ ] (Previous) to move back to the pre
vious screen.