LG CLOi UV-C Bot User Manual page 55

12 Before starting UV processing, install the door
sensor on the door handle and press [OK].
If the door sensor is turned off or not paired, the
guidance screen is displayed as shown
below.
13 Set the intensity of UV processing. You can
select the UV processing intensity level
from from [Normal] and [High].
[Normal]
It takes about 15 minutes for UV processing of a
25 square meter space.
[HIGH]
UV processing ability is higher than NORMAL
mode. It takes about 30 minutes for UV
processing of a 25 square meter space.
,
Note
y Press [ ] (Previous) to move back to the pre
vious screen.
Operation 55
4