LG CLOi UV-C Bot User Manual page 51

10 To stop UV Processing, press the emergenc
y stop button, or press the pause button if
it is not on the standby screen.
To completely stop UV Processing, press the
[ ] button (previous) and then click [Stop] in t
he pop-up window. UV Processing
is stopped. Press [Cancel] to close the po
p-up.
11 After UV processing is complete, click
[OK].
12 To continue UV processing, move the
robot to the next target space.
To end UV processing, turn off the robot, a
ttach and fasten the UV-C lamp protective
covers and store the robot in a safe place.
Operation 51
4