Charging - LG CLOi UV-C Bot User Manual

Charging

You can charge the battery manually when using the robot for the first time or when char
ging is necessary while you are operating the robot.
The low battery message will appear according to the previously set battery level for cha
rging (20%, 30%, 40%).
1 Move the robot to the desired position for charging. (See page 18.)
2 Connect the adapter and the power cord.
3 Open the terminal cover on the rear side of the robot.
4 Connect the adapter cable to the charging terminal.
5 Connect the power plug to an outlet.
,
Note
y Make sure to use the adapter provided with the robot. Using other adapters may lead
to product failure and will void the product warranty.
y If there are foreign substances on the charger terminal, the product may not be char
ged normally. Clean the it with a soft cloth.
y Charging time may vary depending on the condition of the battery.
y If the battery is left uncharged for a long time, battery failure may occur.
y Use the charger at 0°C - 35°C (32°F - 95°F).
y Install and use the charger in a well-ventilated place.
y Do not charge the robot in wet places.
Before Use 21
1