Advertisement
5.
Attach the 650w/1050w (module dependent) side panel (A-2) to the 3-way junction
(D) as shown above (see step 1 for method).
7.
Sub-assembly A
Attach the 650w/850w (module dependent) back panel (C-1) of sub-assembly B, to
the 2-way junction (B-1) of sub-assembly A, as shown above (see step 1 for method).
DEN.Booth Assembly Instructions
A-2
825d Module = 650w Side Panel
1225d Module = 1050w Side Panel
Sub-assembly B
6.
Tap the top of the 650w/1050w (module dependent) side panel (A-2) with a
cushioned mallet to fully engage as shown above.
Tie the 650w/1050w (module dependent) side panel (A-2) to the 2-way junction (D)
using a bottom connector link
as shown above (see step 2 for method).
(Z)
You have now fully assembled sub-assembly B.
8.
Tap the top of the 650w/850w (module dependent) back panel (C-1) of sub-assembly
B, with a cushioned mallet to fully engage, as shown above.
Tie the 650w/850w (module dependent) back panel (C-1) of sub-assembly B to the
2-way junction (B-1) using a bottom connector link
If building a 2 person unit continue to step 13.
If building a 3 or more person unit continue to step 9.
Z
Bottom Connector Link
(see step 2 for method).
(Z)
DWG No: SASS-0040
Revision: B (09/12/15)
Drawn by: Jkb
Drawn date: 06/01/15
Advertisement
