Advertisement
Quick Links
Advertisement
Related Manuals for OCEE DESIGN Den Seat SASS-0079 A
Summary of Contents for OCEE DESIGN Den Seat SASS-0079 A
- Page 1 Assembly Instructions Den Seat (ZigZag Module) SASS-0079 A...
- Page 2 Seat Components Seat | Base Box Seat | Pad Seat | Back Rest M6 x 85mm Bolt M6 x 45mm Bolt 30mm Washer Tools Bradawl (or similar, see step 01 4mm Allen Key/Phillips Screwdriver DWG No: SASS-0079 DEN Seat Assembly Instructions Revision: A (08/12/15) Drawn by: CE Drawn date: 09/10/15...
- Page 3 Panel A - Seat | Base Box 20mm Levellers All inserts are indicated by the circular white stickers, as shown above. Locate the Before assembling, make sure that all the levellers are set so that the bottom of the inserts through the fabric in the holes indicated above and pierce using a sharp pointed tool base box (A) is flush with the bottom of the Den panels (nominally 20mm from the such as a bradawl or the end of a screwdriver, in preparation for passing bolts into ground).
- Page 4 Lower the seat pad (B) onto the base box (A) until it locates into place. (As shown Lower the back rest (C) onto the seat pad (B). (As shown above) above) Repeat steps 01 - 06 for the remaining seats in the configuration. DWG No: SASS-0079 DEN Seat Assembly Instructions Revision: A (08/12/15)