Advertisement
13.
Sub-assembly C
C-2
1000w Module = 650w Back Panel
1200w Module = 850w Back Panel
Attach the 650w/850w (module dependent) back panel (C-2) to the 2-way junction
(B-2) (see step 1 for method).
15.
Attach the 650w/1050w (module dependent) side panel (A-3) to the 2-way junction
(B-2) as shown above (see step 1 for method).
DEN.Booth Assembly Instructions
B-2
2-Way Junction (90°)
A-3
825d Module = 650w Side Panel
1225d Module = 1050w Side Panel
14.
Tap the top of the 650w/850w (module dependent) back panel (C-2) with a cushioned
mallet to fully engage as shown above.
Tie the 650w/850w (module dependent) back panel (C-2) to the 2-way junction (B-2)
using a bottom connector link (Z) (see step 2 for method).
16.
Tap the top of the 650w/1050w (module dependent) side panel (A-3) with a
cushioned mallet to fully engage as shown above.
Tie the 650w/1050w (module dependent) side panel (A-3) to the 2-way junction (B-2)
using a bottom connector link (Z) (see step 2 for method).
You have now fully assembled sub-assembly C.
DWG No: SASS-0040
Revision: B (09/12/15)
Drawn by: Jkb
Drawn date: 06/01/15
Advertisement
