Advertisement
Quick Links
Advertisement
Related Manuals for OCEE DESIGN SASS-0096
Summary of Contents for OCEE DESIGN SASS-0096
- Page 1 Assembly Instructions DEN.Honeycomb 8 Person 1600w & 1950w Modules SASS-0096...
- Page 2 1600w Module = 1334w Worksurface M6x20 Button Head Bolts Small Worksurface Fixing Bracket 1950w Module = 1684w Worksurface Tools 4mm Allen Key/Phillips Screwdriver Cushioned Mallet 13mm Spanner DWG No: SASS-0096 DEN.Honeycomb Assembly Instructions Revision: - Drawn by: CE Drawn date: 06/11/15...
- Page 3 Assembled Configuration Illustration (for Reference) DWG No: SASS-0096 DEN.Honeycomb Assembly Instructions Revision: - Drawn by: CE Drawn date: 06/11/15...
- Page 4 Assembled Configuration Illustration (for Reference) DWG No: SASS-0096 DEN.Honeycomb Assembly Instructions Revision: - Drawn by: CE Drawn date: 06/11/15...
- Page 5 (between the nut and the bottom of the panel/junction) in the hooked slot and pivot around to insert the other leveller into the straight slot. Fully tighten both nuts using a 13mm spanner to trap the connector (Z). DWG No: SASS-0096 DEN.Honeycomb Assembly Instructions Revision: -...
-
Page 6: Shell Assembly
Shell Assembly DWG No: SASS-0096 DEN.Honeycomb Assembly Instructions Revision: - Drawn by: CE Drawn date: 06/11/15... - Page 7 When fixing the small brackets (Y) to the structure, make sure to pass the machine screws (W) through the 7mm hole. Repeat steps 5 to 7 for the other 3x worksurfaces (G) on the unit. DWG No: SASS-0096 DEN.Honeycomb Assembly Instructions Revision: -...