Advertisement
20.
W
M6x20 Button
Head Bolts
W
W
4mm
Allen Key
1000w Module = 900w Worksurface
1200w Module = 1100w Worksurface
X
Lower the worksurface (E) onto the brackets (attached to the structure in step 19).
Attach the worksurface fixing brackets (X&Y) to the underside of the worksurface (E)
using 1x M6x20mm socket button head bolt (W) per small bracket (Y) and 2x
M6x20mm socket button head bolts (W) per large bracket (X). Use the allen key to fully
tighten all the bolts (W) located in the brackets (X&Y) (installed in step 19), to fully
secure the brackets (X&Y) to the worksurface (E) and panels.
DEN.Booth Assembly Instructions
W
W
W
W
E
Y
21.
Repeat steps 19 - 20 for the remaining worksurfaces (E) in the configuration.
DWG No: SASS-0040
Revision: B (09/12/15)
Drawn by: Jkb
Drawn date: 06/01/15
Advertisement
