Advertisement
Quick Links
Advertisement
Related Manuals for OCEE DESIGN DEN.Curve 2 Person
Summary of Contents for OCEE DESIGN DEN.Curve 2 Person
- Page 1 Assembly Instructions DEN.Curve 2 Person SASS-0033 B...
- Page 2 Shell Components Curve (LH) Curve (RH) 850w Side Panel Extended 3-way Junction Bottom Connector Link Worksurface Components Den.Curve Worksurface M6x20 Button Head Bolts Small Worksurface Fixing Bracket Tools Cushioned Mallet 13mm Spanner 4mm Allen Key/Phillips Screwdriver DWG No: SASS-0033 DEN.Curve Assembly Instructions Revision: B (27/10/15) Drawn by: JB Drawn date: 05/12/14...
- Page 3 Assembled Configuration Illustration (for Reference) Before assembling make sure that the levellers on all components are set at a 20mm height minimum. 20mm min DWG No: SASS-0033 DEN.Curve Assembly Instructions Revision: B (27/10/15) Drawn by: JB Drawn date: 05/12/14...
- Page 4 Bottom Connector Link Curved Panel (RH) Junction Panel Connector Extended 3-Way Junction M8 nut Leveller Insert the modular screws in the extended 3-way junction (A) into the keyholes in the curved panel (C), making sure that all of the screws have engaged into the keyholes. Curved Panel (LH) 850w Side Panel Repeat steps 1 and 2 (above) to attach the extended 3-way junction (A) to the curved...
- Page 5 Small Worksurface Fixing Bracket (x10) M6x20 Button Head Bolts (x10) 730mm Worksurface height 750mm Worksurface height Bottom Connector Link Tap the top of the 850w side panel (D) with a cushioned mallet to fully engage. Attach the worksurface fixing brackets (Y) to the Den structure using 1x M6x20mm socket button head machine screw (W) per bracket (Y) in the positions shown above.