Page 4
Inner Plate Stabiliser Foot (Full) M8 grub screws (x4) Loosely insert the inner plate (B) into the stabiliser foot (A). 4mm allen key D -1 1950w Module = 650w Side Panel 2550w Module = 850w Side Panel 3150w Module = 1050w Side Panel Insert the 650w/850w/1050w (module dependent) side panel (D-1) into the stabiliser Tighten the 4x M8 grub screws (C) to push the inner plate into the Den panel to foot (A).
Page 5
4mm allen key D -2 1950w Module = 650w Side Panel 2550w Module = 850w Side Panel 3150w Module = 1050w Side Panel Insert the other 650w/850w/1050w (module dependent) side panel (D-2) into the Tighten the 4x M8 grub screws (C) to push the inner plate into the Den panel to stabiliser foot (A).
Page 6
1950w Module = 650w Side Panel 2550w Module = 850w Side Panel 3150w Module = 1050w Side Panel Lift the the second 650w/850w/1050w (module dependent) side panel (D)/foot (A) After making sure all of the screws are engaged in the keyholes, tap the top of the 650w/850w/1050w (module dependent) side panel (D) with a cushioned mallet to fully sub-assembly (from step 4) and insert the modular screws into the keyholes in the engage(as shown above).