Page 4
Assembled 2 Person Configuration Illustration (for Reference) Before assembling make sure that the levellers on all components are set at a 20mm height minimum. 20mm min DWG No: SASS-0040 DEN.Booth Assembly Instructions Revision: B (09/12/15) Drawn by: Jkb Drawn date: 06/01/15...
Page 5
Assembled 3 Person Configuration Illustration (for Reference) Bottom Connector Link x10 3-Way Junction 3-Way Junction 1000w Module = 650w Back Panel 1000w Module = 650w Back Panel 1000w Module = 650w Back Panel (90°) (90°) 1200w Module = 850w Back Panel 1200w Module = 850w Back Panel 1200w Module = 850w Back Panel 2-Way Junction...
Page 6
Assembled 4 Person Configuration Illustration (for Reference) Bottom Connector 1000w Module = 650w Back Panel 3-Way Junction 1000w Module = 650w Back Panel 3-Way Junction 1000w Module = 650w Back Panel 3-Way Junction 1000w Module = 650w Back Panel Link x13 1200w Module = 850w Back Panel (90°) 1200w Module = 850w Back Panel...
Page 7
Sub-assembly A Bottom Connector Link 2-Way Junction (90°) Junction Panel Connector 825d Module = 650w Side Panel M8 nut 1225d Module = 1050w Side Panel Leveller Insert the modular screws in the 650w/1050w (module dependent) side panel (A-1) After making sure all of the screws are engaged in the keyholes, tap the top of the 650w/1050w (module dependent) side panel (A-1) with a cushioned mallet to fully engage.
Page 8
825d Module = 650w Side Panel 1225d Module = 1050w Side Panel Bottom Connector Link Attach the 650w/1050w (module dependent) side panel (A-2) to the 3-way junction Tap the top of the 650w/1050w (module dependent) side panel (A-2) with a (D) as shown above (see step 1 for method).
Page 9
1000w Module = 650w Back Panel Sub-assembly B 1200w Module = 850w Back Panel 1000w Module = 650w Back Panel 1200w Module = 850w Back Panel 3-Way Junction (90°) Sub-assembly B 825d Module = 650w Side Panel 3-Way Junction (90°) Sub-assembly B 1225d Module = 1050w Side Panel Attach the 650w/850w (module dependent) back panel (C) of the new sub-assembly...
Page 10
Sub-assembly C 1000w Module = 650w Back Panel 2-Way Junction (90°) 1200w Module = 850w Back Panel Attach the 650w/850w (module dependent) back panel (C-2) to the 2-way junction Tap the top of the 650w/850w (module dependent) back panel (C-2) with a cushioned (B-2) (see step 1 for method).
Page 11
Sub-assembly C Attach the 650w/850w (module dependent) back panel (C-2) of sub-assembly C to Tap the top of the 650w/850w (module dependent) back panel (C-2) with a cushioned the 3-way junction (D) (see step 1 for method). mallet to fully engage as shown above. Tie the 650w/850w (module dependent) back panel (C-2) to the 3-way junction (D) using a bottom connector link (Z) (see step 2 for method).
Page 12
M6x20 Button Head Bolts Allen Key 1000w Module = 900w Worksurface 1200w Module = 1100w Worksurface Lower the worksurface (E) onto the brackets (attached to the structure in step 19). Repeat steps 19 - 20 for the remaining worksurfaces (E) in the configuration. Attach the worksurface fixing brackets (X&Y) to the underside of the worksurface (E) using 1x M6x20mm socket button head bolt (W) per small bracket (Y) and 2x M6x20mm socket button head bolts (W) per large bracket (X).