Maintenance; Troubleshooting; Correct Disposal - Magicfx FX-ARM CONTROLLER User And Installation Manual

5
Press the e-stop reset button.
The e-stop reset button light will go off and the e-stop button will now illuminate.
The FX-ARM CONTROLLER is ready for use again.

MAINTENANCE

To achieve the maximum service life of the MAGICFX
regularly clean the MAGICFX
correctly.
Contact MAGIC FX if the MAGICFX
DANGER

TROUBLESHOOTING

4
Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved
with the instructions as described in this manual.
5

CORRECT DISPOSAL

Disposing of this product correctly will help save valuable resources and prevent any
potential negative effects on human health and the environment, which could
otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest designated
collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
your national legislation.
®
FX-ARM CONTROLLER and test if it is functioning
® FX-ARM CONTROLLER is not functioning correctly.
Do not replace parts yourself; always consult MAGIC FX.
This symbol on the product and / or accompanying documents
means that used electrical and electronic products should not be
mixed with general household waste. For proper treatment,
recovery and recycling, please take this product to designated
collection points where it will be accepted free of charge.
Alternatively, in some countries you may be able to return your
products to your local retailer upon purchase of an equivalent new
product.
FX-ARM CONTROLLER — User and Installation Manual
®
MAGICFX
® FX-ARM CONTROLLER you must
13