Let's Arm; Connect The Controller - Magicfx FX-ARM CONTROLLER User And Installation Manual

WARNING
WARNING

LET'S ARM!

3

CONNECT THE CONTROLLER

3.1
1 Place the controller on a stable surface in a suitable area.
2 Make sure the arm/disarm key is in the 'OFF' position and the e-stop button is
not pressed in.
NOTICE
3 Connect the PowerCon TRUE1 power cable to the power input of the controller.
8 MAGICFX FX-ARM CONTROLLER — User and Installation Manual
®
Make sure the Arm cables from this MAGICFX
CONTROLLER are not connected into any products that are not
compatible with this safety device as this may damage your
hardware. Likewise, do not connect any RJ45 cables from any
other system carrying a different data protocol as this may
damage your hardware.
Only one MAGICFX
single connected system. Connecting more than one controller
with RJ45 Arm leads can cause damage to them.
if the e-stop is pressed in it can be released with a clockwise
quarter turn.
®
FX-ARM CONTROLLER can be used in a
® FX-ARM