Table of Contents
Advertisement
User Documentation MAGICFX® CO2 Jet
13. TROUBLESHOOTING
-
The CO2 Jet is leaking gas.
Check is the hose is connected tight enough to the CO2 Jet. Try to fasten it more tightly by using a
wrench to stop the leaking.
-
The CO2 bottle is leaking gas.
Check if the manual adapter is connected well to the CO2 bottle. Use a wrench to connect it more
tightly to stop the leaking. If this doesn't solve the problem, close the CO2 bottle, make sure all
gas is removed out of the hose by activating the CO2 Jet. Now disconnect the manual adapter
from the CO2 bottle and check if the rubber sealing ring is still there and if it is not damaged.
Replacing the sealing ring will stop the leakage.
-
I hear the CO2 Jet producing gas by a sizzling noise but there is no white smoke plume
visible.
Probably you are not using the right CO
with a dip pipe to the CO2 Jet. In rare cases the dip pipe can be broken. Replace the cylinder and
notify your gas supplier about the defect.
-
The CO2 Jet still does not work after troubleshooting
Always contact your dealer or the MAGIC FX technical department if you have any doubts or
questions about the operation of or other issues related to the CO2 Jet.
14. TECHNICAL SPECIFICATIONS
Length:
Dimensions
Width:
and weight
Height:
Weight:
Input:
Output:
Power
Consumption:
Fuse:
Input:
CO
Output:
2
Consumption:
15. MAINTENANCE
To prolong the life of the CO2 Jet for as long as possible, you must regularly clean it and test that it
functions properly.
Regardless of the reason, contact MAGIC FX if the CO2 Jet does not work properly
16. GUARANTEE
The MAGIC FX CO2 Jet has a 3 year factory guarantee.
-
The guarantee is annulled should the CO2 Jet be used for purposes other than intended or for
applications that are not listed in the manual.
The guarantee is annulled should the device be used incorrectly or in a manner contrary to its
-
instructions.
The guarantee is annulled if the device is altered without the permission of its supplier.
-
Page 17
cylinder. Connect a cylinder with liquid CO2 equipped
2
195mm (12.2")
150mm (14.96")
130mm (11.61")
2,85 Kg (21,5lbs.)
AC 230V~50-60Hz
AC 230V~50-60Hz
20W
AC 230V~50-60Hz
Liquid CO
2
CO
Gas
2
0,5 Kg/s (1.1 lbs/s)
DANGER WARNING:
Never replace parts yourself. Always consult MAGIC FX when needed.
Advertisement
Table of Contents
