Maintenance; Warranty - Magicfx BUBBLE MONSTER User Manual

9. SWITCHING OFF THE BUBBLE MONSTER
Switching off the BUBBLE MONSTER
Follow the following procedure in order to switch off the Bubble Monster
1.
2. Make sure the Bubble Monster is not rotating any more
3. Remove the electrical plug from the socket.
4. Remove the bubble projector from the Bubble Monster.
5. Lift up the Bubble Monster and pour the remaining bubble fluid in the reservoir back into the can
with the help of a funnel.
6. Screw the top of the can back on so no dirt or dust particles can mix with the bubble fluid.
BE CAREFUL:
The Bubble Monster can damage if you do not follow above steps
correctly.
10. ERRORS
Check if the axle of the bubble wheel got stuck on the outer connection elements.
The amount of bubbles is reducing
Check if there is enough bubble fluid in the reservoir. Check if the bubble wheel is submerged
properly and if the eyes of the bubble wheel take up the fluid as well.
Check the fan speed set up. If necessary, increase the fan to increase the amount of bubbles.
11. CLEANING
Clean the reservoir, the bubble projector and the bubble wheel after use with warm water.

12. MAINTENANCE

DANGER WARNING:
Do not attempt to replace parts yourself, but have them replaced by a
technical skilled person of MAGIC FX.
13.

WARRANTY

Warranty
The Bubble Monster comes standard with a warranty of 1 year.
Warranty expires when the Bubble Monster is not used for its intended purpose and in ways not
described in the manual.
Warranty also expires when the Bubble Monster has been operated wrongly or in contradiction
with the manual.
Warranty expires when the Bubble Monster has been adapted without approval of the
manufacturer.
Changing of safety guards or discontinuation of safety guards is strictly prohibited.